UTEMASTER CENTURION ALUMINIUM CANOPY

UTEMASTER CENTURION ALUMINIUM TUB CANOPY (BLACK OR WHITE)

"The most accessible Ute Canopy"

Please note the lead time on this accessory is 8 weeks. 

Utemaster Centurion Canopy Gallery

2021 Toyota Hilux SR5 Cruiser Blue Black with Utemaster Centurion Ute CanopyUtemaster Centurion Ute Canopy to suit Isuzu D Max 2020 2021 Ute Canopy Black

May be an image of food and carMay be an image of car and food

UTEMASTER CANOPY                                   $6050 PLUS FREIGHT & FITTING

UTEMASTER CANTILEVER ROOF RACK                  $1650 PLUS FREIGHT & FITTING

CENTRAL LOCKING (ALL 3 DOORS - RATAINS FACTORY FOB KEY)                   $785 PLUS FITTING

FREIGHT PRICES

UTEMASTER CANOPY FREIGHT                          $528

CANTILEVER ROOF RACK FREIGHT (AT THE SAME TIME AS CANOPY)              $121

FITTING PRICES

UTEMASTER CANOPY FITTING $395

CANTILEVER ROOF RACK FITTING   $FREE IF FITTED AT THE SAME TIME AS CANOPY

CENTRAL LOCKING FITTING    $100  

 

 

AUS Design Registration 201917368

What is the Utemaster Centurion Canopy?

Traditionally, ute canopies are constructed with fibreglass or ABS plastic. The Utemaster Centurion Canopy is constructed with Aluminium which gives it greater strength.

Because it is so strong, we can maximise access through full-width doors without compromising on the structural integrity of the canopy. 

This product has been designed and manufactured in New Zealand at Utemaster's state of the art facility and focuses on three key features: Access, Strength & Security. 

The most accessible canopy in the world

Finding it hard to reach your tools and equipment through small canopy windows?

Wasting time and feel frustrated when trying to access your gear? 

The Utemaster Centurion Canopy features full-width doors that give you access to your gear the whole way down each side. There is no obstruction along the top edge of your TUB meaning you can easily reach over and pull your gear out through the side door opening.

Superior Weatherproofing

We were recently asked: “What are they like keeping the rain out when open ???? the worst part of my canopy is all the water tracks straight inside with wings open…”

That's so frustrating! We can only imagine how many tradespeople and recreationists out their struggle with this over the winter periods. Not only does it damage your gear inside, but it also delays progress on a job site.

We thought we'd share a video of the Utemaster Aluminium Canopy being water-tested during the design/ development phase a few months back - as you can see the built-in rain channels send any water landing on the canopy away for the inside of your tub.

Security

Losing your tools and equipment due to a break-in is not only lost money - this can also have an impact on the time and productivity of the job you are working on. Concealed security latches mean each door is locked on both sides, making it hard to pry open.

Optional Central Locking Accessory

The Load-Lid Central Locking kit allows you to lock your Ute Canopy with the factory Vehicle Remote. The Central Locking kit comes complete with a plug and play loom.

Part# LL-CLK

Please note: Your lid can be locked manually using the supplied key. The Central Locking loom is an optional upgrade accessory.

Heavy Duty Construction

The Aluminium construction allows this canopy to carry much heavier loads than you ever could on a fibreglass or ABS canopy. 

This means you can stack it with all your gear to get stuff done and enjoy life's adventures without having to worry about it cracking or damaging your wellside. 

Super Customisable 

With a fibreglass canopy it is hard to mount accessories such as spotlights, roof trays or anything that requires drilling into the fibreglass. This can also compromise the water-tightness and weaken the construction. 

With the Utemaster Canopy being aluminium you can easily retro-fit any accessory to the body without having to worry about the structural integrity and it allows you to fully customise your setup. 

Utemaster Aluminium Canopy Super Customisable Adventure Touring Overlander

Optional Cantilever Rack

The Cantilever Rack is a seriously robust optional extra for the Aluminium Canopy with a 200kg on-road and off-road load capacity. 

All utes are designed to flex in between the tub and the cab. This can be problematic for roof racks that are mounted to both the cab and the canopy because it can cause damage while the flex occurs.

Because the Aluminium Canopy is so strong, which extends over the cab making it completely independent and eliminates the risk of damage to the cab! The Cantilever Rack is seriously useful and robust and is an optional extra for the Aluminium Canopy.

Cantilever Rack To Suit Ford Ranger Canopy

Part #CANTILEVER-FR

Rear Roller Bar to suit Cantilever Rack

Part#CANTILEVER-ROLLER-FR 

AUS Design Registration 201917366

No permanent fixtures

Looking at upgrading your ute in the near future? Have you ever tried re-selling a ute after removing a fibreglass to ABS plastic Canopy?

The Centurion Aluminium Canopy is fixed to the wellside using existing factory mounting holes. This means no damage to the wellside of your ute when the canopy is removed.

Utemaster Centurion Ute Canopy Fitting Fixing Removable

Utemaster Centurion Canopy Gallery