MAXTRAX  XTREME

$499

• Multi-award-winning MAXTRAX XTREME is the most advanced 4WD recovery track ever created, featuring 88 replaceable hard-anodised alloy teeth moulded into a heavy-duty, super-tough, engineering-grade reinforced Nylon recovery track. MAXTRAX XTREME is designed and manufactured for professional use based on direct feedback from some of the world's most elite military units, off-road racing champions, certified 4WD driver trainers and globe-trotting expedition leaders as a mission-critical recovery track for a wide range of scenarios where time is of the essence and aggressive driving and excessive wheel spin is often unavoidable, including active combat situations, timed motorsport competitions and remote area expeditions.
• MAXTRAX XTREME is manufactured in Australia using our secret recipe; a heavy-duty, super-tough, engineering-grade reinforced Nylon; the same amazing material that we’ve made MAXTRAX MK2 from for almost a decade. The manufacturing process involves a custom jig attached to a robot arm inserting the 88 alloy teeth in the correct orientation into special sockets in the injection mould, then over-moulding them into the body of the track, ensuring that the Nylon material conforms closely to the thread of each tooth for a super secure fit, virtually eliminating the risk of a tooth unwinding from the body of the track. All 88 alloy teeth are hard-anodised to protect against corrosion in harsh, salt water or muddy environments.
• As the alloy is significantly harder and more-durable than the rubber compound found in tyres and also more resistant to wear from a spinning tyre than any polymer available today, you can expect faster, more secure engagement with the tyre's tread pattern; which not only makes MAXTRAX XTREME the most-durable recovery track on the market, but also the fastest.
• MAXTRAX XTREME is also easily repairable in the field. If a tooth gets damaged, simply flip the board over and use a T-50 Torx bit to remove and replace the damaged tooth. MAXTRAX XTREME uses a proprietary and patent-pending thread & bliplock system to ensure secure physical engagement of a new tooth with its recess after replacement. Replacement teeth and a custom T-head tool which also works with our mounting pins will soon be available on our website.
• MAXTRAX XTREME will nest with MAXTRAX MK2 recovery tracks, (although there is a slightly larger space between the tracks due to the design of the underside of the MAXTRAX XTREME).
• Mounting pins designed exclusively for the MAXTRAX XTREME will be available soon, including a hybrid mounting pin designed for those adding a set of MAXTRAX XTREME to the top of their current MK2 recovery tracks.
• MAXTRAX XTREME is also compatible with MAXTRAX mini and our fixing and linking kit to create a portable roadway.
  • Australian designed, engineered and manufactured
  • 88 replaceable anodised alloy teeth; designed for XTREME users
  • Safe and easy recovery from sand, mud, snow and slush
  • Made from super tough engineering grade reinforced Nylon
  • Compatible with MAXTRAX MKII and MAXTRAX mini
  • Proven, patent-pending, multi-award-winning design
  • Weight: 9kg/20lbs per pair
  • Six glove-friendly handles
  • Lifetime warranty
  • A variety of mounting and carrying options are available

​​  

MAXTRAX MOUNTING PIN SET

$44.99

MAXTRAX TELLTALE LEASHES

$8.99

MAXTRAX FIXING & LINKING KIT

$39.99

For linking MAXTRAX together to make a continuous track or pegging MAXTRAX to a slippery surface to provide maximum traction. The kit includes 8 pegs & 4 straps made of the same super tough reinforced Nylon as MAXTRAX. * Designed for MAXTRAX MKII only. (MAXTRAX NOT INCLUDED)

MAXTRAX BLACK CARRY BAG

$139

Our heavy-duty Black Cordura Nylon, Nylon mesh lined carry bag provides an attractive tote and storage for your MAXTRAX, keeping mud, sand and dirt out of your vehicle. Stylish, shaped, snug fitting bag features heavy duty Zippers. (MAXTRAX NOT INCLUDED). *Sized for MAXTRAX MKII only  

MAXTRAX REAR HARNESS

$149

The MAXTRAX Rear Wheel Harness lets you safely and securely carry your MAXTRAX on your vehicle's rear-mounted spare tyre. Quick and simple to install, the harness makes it easy to quickly grab your MAXTRAX when you need them in a hurry and means you can carry dirty ones without dropping sand, mud or snow in or on your vehicle. The harness will carry up to 5 MAXTRAX (or 4 really dirty ones that won't stack together neatly) and includes a pouch to hold your fixing pegs and linking straps. *PLEASE NOTE: The MAXTRAX Rear Wheel Harness is designed to suit vehicles where there is easy access behind the spare wheel mount, typically with an aftermarket swing away carrier or rear bar such as Kaymar. * Designed for MAXTRAX MKII only. (MAXTRAX NOT INCLUDED).​  

TRED PRO MOUNTING BRACKET

$64.95 EACH

Please note. TRED Pro Mounting Bracket comes as a single unit. Fastening hardware not included.

TRED PRO RATCHET/HANDLE ONLY

(PART FOR THE MOUNTING BRACKET)

$20 EACH

TRED PRO MOUNTING BRACKET EXTENSION PINS

$19.95 PAIR

Need to hold two pairs (4 units) of TRED 800 or TRED 1100? The Extension Pins are designed to suit the TRED Pro Mounting Bracket and allow two pairs of TRED 800 or TRED 1100 units to mount to them.

Note. The Extensions Pins are not required for two pairs (4 units) of the TRED Pro. The standard pins will hold two pairs of TRED Pro's.

Built with off-road enthusiasts in mind, the TRED Pro Mounting Bracket is made from corrosion resistant materials and a robust, durable design to ensure it satisfies the rugged conditions of the great outdoors.

NOTE: This Extension Pin set will only suit the TRED Pro Mounting Bracket, and not the TRED 1100 Mounting Bracket.

TRED PRO CARRY BAG

$89

The Ultimate Off Road Carry Bag to suit TRED Pro, TRED 1100, TRED 800 and other leading brands such as MAXTRAX and others. The TRED Pro Carry Bag is made from super durable and waterproof canvas material. It features various gear storage pockets for your tow straps, shackles, winch blocks and anything else you need to carry. The extra large front pocket is made from high quality UV stabilised mesh, great for keeping anything you need to dry out and doubles as a great rear wheel trash bag. The webbing straps will attach the bag to your rear wheel carrier, roof racks and anywhere else you can strap it down, they also double as great backpack straps. There is no other recovery gear bag like it.

The TRED Pro Carry Bag has been designed to hold one set/pair of TRED Pro or TRED 1100 or TRED 800 traction boards.

IRONMAN 4X4 HIGH LIFT JACK 48" INC COVER

Simple to use, easy to clean and highly efficient, the 4WD Lift Jack can be used for lifting, pushing, pulling or winching.

When using a high lift jack on a modern day vehicle you need to take care to understand the correct and safest mounting points on the car. Before you head off into the bush ensure you know where these are. Ironman 4x4 Highlift jacks comply with Australian safety standards. Simply to use, easy to clean and highly efficient. 1050kg lift capacity with 97cm of continuous lift and a free carry bag.

This Jack complies with Australian & NZ standards and has the following features

• 1050kg lifting capacity
• 48 inches or 120cm tall with 97cm continuous lift
• Low pick up point
• Long lifting nose of 10cm, for positive contact with load
• Safety shear bolts installed
• Weighs only 14kgs
• Convenient carry bag included

IRONMAN 4X4 HIGH LIFT JACK 60" INC COVER

Simple to use, easy to clean and highly efficient, the 4WD Lift Jack can be used for lifting, pushing, pulling or winching.

When using a high lift jack on a modern day vehicle you need to take care to understand the correct and safest mounting points on the car. Before you head off into the bush ensure you know where these are. Ironman 4x4 Highlift jacks comply with Australian safety standards. Simply to use, easy to clean and highly efficient.

This Jack complies with Australian & NZ standards and has the following features

• 1050kg lifting capacity
• 60 inches or 153cm tall
• Low pick up point
• Long lifting nose of 10cm, for positive contact with load
• Safety shear bolts installed
• Weighs only 17kgs
• Convenient carry bag included

IRONMAN 4X4 TYRE LIFT KIT

Designed to be used in conjunction with a High Lift Jack this convenient hook allows for easy lifting of large 4 Wheel Drive tyres.​  

IRONMAN 4X4 BUMPER LIFT KIT

Designed to be used in conjunction with a High Lift Jack this convenient bracket allows for easy lifting of 4 Wheel Drive bumpers.​  ​  

ARB HYDRAULIC JACK 

$1044

POWERFUL HYDRAULIC TECHNOLOGY

Adding a new dimension to traditional techniques, the long-travel ARB JACK is backed by the unique power of hydraulic technology. Kicking into action when even the lightest force is applied to the handle, the hydraulics will smoothly jack the vehicle up at up to 13mm increments with each downward manoeuvre. Whilst in action, a black rubber body bumper shields the vehicle from risk of damage during the recovery.

The easy-to-access red lowering lever ensures lowering the vehicle is achieved swiftly and safely thanks to the two-stage descent feature and safety stop. Empowering the user with dual lowering speeds, with a press of the lever, a slow or rapid descent can be achieved.

KEEPING A LOW PROFILE

Carefully designed upon the importance of matching ergonomic form with safe and reliable function, the handle’s high position and top pivot function provides users with ultimate control while preventing the need to uncomfortably kneel down in a deep trench to operate.

READY FOR HEAVY LIFTING

Built tough to take on the grunt of the most challenging recovery missions, alike to the heavy-duty Old Man Emu BP-51 shock absorbers, JACK’s body is made from aircraft grade 6061 T6 aluminium for maximum strength. Running up the body, 9 hooking points offer the adjustable hook a wide range of lifting heights; capable of lifting up to a total of 2,000kg.

When under load, an internal blow-off valve provides overload protection to safeguard both JACK and most importantly, the user, from the dangerous consequence of the vehicle suddenly dropping if the working limit is exceeded

STAND YOUR GROUND WITH 360° ADJUSTABILITY

JACK’s body can be rotated 360° to align the pivoting foot to match the terrain.

JACK is compliant with the following standards and regulations:

• AS/NZ 2693 – 2007
• ASME B 30.1 – 2015

​  

ARB HI-LIFT JACK       

48"  $187      60"   $198   

ARB EXTREME JACK   

48"  $ 261     60"   $282

Made from high quality tensile strength grades of malleable castings and with a lifting capacity of 1050kg, the ARB Hi-Lift jack and ARB Hi-Lift jack X-treme have become staple recovery items amongst four wheelers all over the world.

The Hi-Lift jack X-treme incorporates durable gold-zinc coated hardware, a quick release lever and one position set-up for all winching, clamping and spreading requirements.

IRONMAN 4X4 4.2T MAXI - JACK

Simple to use this essential recovery equipment is great for use in mud, snow and sand. 4.2T lifting capacity providing a 750mm maximum lift height.

The Ironman 4x4 Maxi Exhaust Jack is highly efficient, with no complicated moving parts to jam or seize. Features a reliable 1 way valve at the end of the hose, which will keep the bag inflated for hours. Great to lift your vehicle out of a hole when it's up to the axles, whether in snow, dirt, mud or sand. Comes as a complete kit including two protective mats to prevent puncturing the bag, operating instructions and a handy carry bag in which you can store everything.

Includes 5 heavy duty spikes for increased stability, 6m long inflation hose, leather gloves and handy carry bag.

• 4.2 Tonne lifting capacity
• 750mm Max lift height
• Highest Quality Japanese PVC for strength & long life
• Reliable one way valve to maintain inflation.
• 5 x Heavy duty ground fixing spikes for increased stability
• 6 Metre long heat resistant inflation hose
• All joins are fully seam stitched and sealed.
• Triple protection layers for top and bottom surfaces.
• Includes repair kit and carrybag
• Premium leather gloves
• Compatable with all 4×4’s including latest turbo diesel models.
• Contains full instruction manual.

​  

BUSHRANGER EXHAUST JACK SERIES II

$240

Bushranger® Exhaust Jack Series II is designed and engineered to perfection. This inflatable jack has a long history in the Australian landscape and put to the test many times. The exhaust jack is an essential piece of equipment that should never be far away in case of emergency. Simple and easy to use will lift your vehicle in seconds out of the undesirable situation. Suitable for use on vehicles, trailers, caravans or farming implements.

The Exhaust Jack assists lifting vehicles in a diverse range of situations or conditions such as sand, mud, snow or soft ground. Total lift height of 78cm (30″). Total lift weight: 2 tonnes (2,000kg).

Simple & easy to use: no complicated moving parts, no jamming or seizing. Reliable and ready to go when you are.

Quick recovery: will safely lift your vehicle up out of a bog in seconds.

Complete Kit: includes, exhaust jack, 3 x protective mats, gloves, coated instructions, convenient carry bag.

​  

BUSHRANGER X JACK

$350

Bushranger® X Jack is designed and engineered to perfection. This award-winning product has a long history in the Australian landscape and put to the test many times. The X-Jack has a triple layer top with a hardcore for maximum protection and stability. The patented two-way inflation system can utilise exhaust or a portable air compressor inflation which provides added control in rate and extent of lift required.

The X Jack assists lifting vehicle in a diverse range of situations or conditions such as sand, mud, snow or soft ground. Total lift height of 75cm. Total lift 2 tonnes.

Dual inflation | Dual alternatives for inflation provide the option of completing the inflation process by connecting a portable compressor to the X jack valve inlet or by the exhaust. (High temp hose included to 140°C.)

Quality construction | The hard top integrated between two layers of reinforced PVC provides structure, reducing the risk of puncture during inflation and deflation.

Convenient | Due to the X-Jacks inflatable nature, it goes anywhere, collapsing flat for easy storage into a heavy duty storage bag.

NOTE: X Jack will not inflate vehicles with an acute angle exhaust or dual exhaust. Vehicles with acute angle exhaust include Toyota Landcruiser 100 Series, Toyota Landcruiser 80 Series, and the Nissan Patrol GU. Please use the X Jack compressor feature to inflate or alternatively an ancillary extension pipe is available free of charge* by contacting customer service on 1800 654 767. This allows the rubber cone on the hose of the X Jack to fit snug.

*Australian only.​​